* Reply to message originally in area CarbonArea

Hello John!

Fri Apr 27 2018, John H. Guillory wrote to Gert Andersen:

 JHG> * Forwarded from area 'FIDO_SYSOP'
 GA>> Fine. I working on make my networks main computer to manage the router
 GA>> and server by have its harddisk moved on to the older cabinet with the
 GA>> same type processor and motherboard in and then move 2 netcards
 GA>> interface to the older capinet too.
 GA>> then has the linux programs as dhcpd and firewall + named give 
 GA>> troubles to load and start the netcards as it should do so only 1-2 
 GA>> netcards ip got working. And it is mostly the on-board interface card 
 GA>> the gives the problem as changing interface name from old name of eth2 
 GA>> to new name as enp2s0 and if I have eth1 and eth2 working is the syste 
 GA>> m lost eth0, and then is it really bad as eth0 communicate with my isp 
 GA>> to tell the isp's router with wan is what on my system. but if I have 
 GA>> both my eth0 and eth1 interface fine working can I poll out with my 
 GA>> fido pc there have ip hostname fido0.kofobbs.net and too 
 GA>> fido.kofobbs.dk (binkp.kofobbs.dk). But if not all 3 cards works can 
 GA>> only my WAN be trouble making, so the best is that both my WAN and LAN 
 GA>> network is working.
 JHG>     Don't give up, we're counting on you!  (Not to add more 
 JHG>frustration to
 JHG>the fire, just reminding you that we're counting on you to get it all 
 JHG>working
 JHG>again!)  So does fido0.kofobbs.net and fido.kofobbs.dk both resolve to 
 JHG>your
 JHG>binkp server as well?  

I now used nearly 5-6 hours to build a new system on my fido main pc and it
gives me troubles, then is now changed some mount on the old used harddisk and
it now seem to work again after some day paused with just done working on same
pc and a better bigger harddisk and this got error by start linux up so I
stopped the pc and test of how the old settings work on the pc again.
It seem to work as it shall now after 12 hours pause with just taken out and
now back on system again.
So I is now on to make the pc ready to run again and hope it just go runs fine
with no bigger error.

  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.39-gentoo-r1 (x86_64))
 * Origin: * The KofoBBS at http://www.kofobbs.dk * (2:230/150)