█████████████████████████████████████████████████████████████
         █════█    █════█    █════█    █════█    █════█    █════█
         █    █════█    █════█    █════█    █════█    █════█    █
         █════█    █════█    █════█    █════█    █════█    █════█
         █    █════█                                  █════█    █
         █════█                                            █════█
         █                 D'Bridge EMAIL System                █
                    Copyright (c) by Nick J. Andre, Ltd.

VERSION 3.99/SR35 - AUGUST 4 2018
---------------------------------

This release improves and fixes printing in D'Bridge along with some other
minor things. The Printer PORT and the Printer Control File (PCF) settings
have been moved out of the COMM screen and into Config-Basic. After
installing this upgrade, verify your printer settings in Config-Basic.

On Windows, printing from the D'Bridge internal Editor may only function
correctly if you use LPT1, LPT2 or LPT3 as the port name; and the printer
must have the chosen port name specified in the printer properties. You
should verify that this is set correctly in the Windows Device Manager or
using the NET SHARE command. If the printer port is not assigned or is
incorrect, printing may not function correctly or cause D'Bridge to hang.

Also:

- An option was added to Config-Basic to disable animations. The default
  setting is left enabled for both upgrades and new installations.

- An option was added back to Config-Basic to manually control timeslicing.
  Please do NOT change this option unless you really need to do so.

- The F1 Help screen and manual have been updated.

Nick Andre
www.net229.org

--- Renegade vY2Ka2
 * Origin: Joey, do you like movies about gladiators? (1:229/426)