Message Area
Casually read the BBS message area using an easy to use interface. Messages are categorized exactly like they are on the BBS. You may post new messages or reply to existing messages!

You are not logged in. Login here for full access privileges.

Previous Message | Next Message | Back to The Linux/FreeBSD MBSE BBS Suppo...  <--  <--- Return to Home Page
   Networked Database  The Linux/FreeBSD MBSE BBS Suppo...   [270 / 554] RSS
 From   To   Subject   Date/Time 
Message   Shawn Highfield    Dane Beko   MBSE 1.07 - trying to compile   April 13, 2017
 4:53 AM *  

 -=> Quoting Dane Beko to Robert Wolfe <=-

 DB> And I've done this as well.

  Here are the instructions from someone in another network that got me
going with my pi setup.

-------- Import ------

I build it on the Pi no problem at all.. No errors or anything.. you just
need to make sure you have the proper packages installed.

First clone the -current source (as root user)

--8<--
cd /tmp
git clone git://git.code.sf.net/p/mbsebbs/code mbsebbs-code
--8<--

Now as root, enter this line to install all packages you need to successfully
build.

apt-get install xinetd telnetd zip unzip libc6-dev libz-dev libbz2-dev
automake arc joe libncurses5-dev libnspr4-dev xorg-dev bison libcap2-dev gdb
libsdl1.2-dev libgtk-3-dev lrzsz

There's a lot of stuff to download so it'll take a few minutes. Once finished
reboot the machine and login as root user (swap out of X session if needed
with CTRL-ALT-F4)

Now as root

cd /tmp/mbse-code
sh ./SETUP.sh

set a password for the mbse user

then LOGOUT and from the same TTY login login as the MBSE user

then as mbse user

cd /tmp/mbse-code
./configure
make
su
<enter root pw>
make install
exit

You MUST login as the mbse user to be able to build and install correctly. If
you just su to the mbse user you will get errors when trying to make install
because you didn't follow instructions :)

You will have to split /etc/xinetd.d/mbsebbs into it's parts (telnet, binkp,
fido, tfido)

Now you can configure the BBS.. all configs must be done as mbse user, never
use root to do anything in /opt/mbse cuz you'll screw up permissions.

There are HTML docs for the mbsetup program. READ THEM! lol

To configure for the first time (as mbse user)

cd /opt/mbse
./bin/mbtask
./bin/mbsetup

-!- EOF ---

I've successfully built MBSE-current on both Pi's and on Debian 8/x64 so it's
almost guaranteed to build for you if you install everything that I listed.

Cavaet: you can debug missing libs fairly easily if you get an error
/usr/bin/ld - cannot locate -l<libname>

<libname> can usually be resolved if you apt-cache search <libname>

- NS
----------------END IMPORT----------

Let me know,

Shawn


... If it was a bet, you wouldn't take it.
--- Blue Wave/386
 * Origin: Tiny's BBS - www.tinysbbs.com (1:229/452.3)
  Show ANSI Codes | Hide BBCodes | Show Color Codes | Hide Encoding | Hide HTML Tags | Show Routing
Previous Message | Next Message | Back to The Linux/FreeBSD MBSE BBS Suppo...  <--  <--- Return to Home Page

VADV-PHP
Execution Time: 0.0763 seconds

If you experience any problems with this website or need help, contact the webmaster.
VADV-PHP Copyright © 2002-2024 Steve Winn, Aspect Technologies. All Rights Reserved.
Virtual Advanced Copyright © 1995-1997 Roland De Graaf.
v2.0.140505

Warning: Unknown: open(c:\Sessions\sess_otbeohvhrtaa606np6170daj46, O_RDWR) failed: No such file or directory (2) in Unknown on line 0 Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (c:\Sessions) in Unknown on line 0 PHP Warning: session_start(): open(c:\Sessions\sess_otbeohvhrtaa606np6170daj46, O_RDWR) failed: No such file or directory (2) in D:\wc5\http\public\VADV\include\common.inc.php on line 45 PHP Warning: Unknown: open(c:\Sessions\sess_otbeohvhrtaa606np6170daj46, O_RDWR) failed: No such file or directory (2) in Unknown on line 0 PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (c:\Sessions) in Unknown on line 0